德國PTL彈簧沖擊錘多檔可調 F22.50

點擊查看大圖

產品價格： < 面議

產品型號：F22.50

品牌：德國PTL

公司名稱：深圳市奧德賽創精密儀器有限公司

所在地：廣東深圳

瀏覽次數：338 次

立即詢價 在線咨詢

騰訊QQ

產品簡介

現貨供應德國PTL彈簧沖擊錘多檔可調F22.50，中國總代理德國PTL彈簧沖擊錘可調式，原裝德國進口，沖擊錘采用不銹鋼制作,精度高，耐用！PTL彈簧沖擊錘0.2J--1.0J，五檔可調，深圳市奧德賽創精密儀器有限公司現貨供應德國PTL彈簧沖擊錘多檔可調F22.50。

產品詳細信息

現貨供應德國PTL彈簧沖擊錘多檔可調F22.50，中國總代理德國PTL彈簧沖擊錘可調式中國總代理德國PTL彈簧沖擊錘：PTL彈簧沖擊錘 F22.50多檔可調，有五個適當?shù)臎_擊能量0.20J,0.35J,0.50J,0.70J和1.00J 多檔型號F22.50 F22.50中國總代理德國PTL彈簧沖擊錘，多檔可調！

長　度： 211mm

重　量： 1250g

外　徑： 50 mm

錘頭重量： 60g

錘頭半徑： 10mm

沖擊組件：包括擊發球柄與錘頭，重量為250g，錘頭由白色聚先亞胺制成

沖擊釋放力：小于10N

PTL彈簧沖擊錘F22.50多少錢？中國總代理德國PTL彈簧沖擊錘可調式。

PTL Spring-operated Impact-test Apparatuses

Universal Impact-test Hammer F 22.50 with 0.20 J, 0.35 J, 0.50 J, 0.70 J and 1.00 J, five selectable impact energies, for impact tests to demonstrate the level of robustness

according to

IEC, EN, VDE and further national standards, detailed description shown in IEC 60068-2-75:1997-08, release mechanism with constructional improvements, however, release force standardized 10 N.

Standard Outfit:

body, including release mechanism and striking element guide, mass 1250 g, outside diameter 50 mm,

striking element, with cocking knob and with hammer head, face of polyamide, spherical segment shape with a radius of 10 mm, mass 250 g, length approx. 315 mm,

release cone, mass 60 g,

helical compression spring, mass 9 g,

disk with knurled edge to select the impact energy,

total length cocked approx. 350 mm, total mass approx. 1 570 g,

supplied in case of plastics, ready for operation, including PTL work certificate concerning calibration of the five impact energies by means of a calibration device according to IEC 60068-2-75:1997-08 Annex B and concerning release force,

Universal Impact-test Hammer

Article No.:

F 22.50

Alternatively:

Impact-test Hammer F 22.1X as Special Type,

as described above, however with only one fixed impact energy.

Impact energy:

Tolerance:

Article No.:

0,14 J

± 0,014 J

F 22.10

0,20 J

± 0,02 J

F 22.11

0,35 J

± 0,035 J

F 22.15

0,50 J

± 0,05 J

F 22.16

0,70 J

± 0,07 J

F 22.17

1,00 J

± 0,1 J

F 22.18

Special Type:

F 22.20, as described above, however as Special Type with one fixed impact energy 2.0 J, tolerance of impact energy ± 0.1 J, striking element with spherical segment shaped striking piece of iron, radius 25 mm, total mass of striking element 500 g, total mass of apparatus 3 630 g,

Impact-test Hammer 2,0 J