Manufacturer: Yokogawa Electric Corporation

Yokogawa Base Plate A2BN3D-02010 for adaptor (for N-IO, 16-channel)

Base plate for adaptor (A2BN3D)

This base plate communicates with a node interface unit via an F-SB bus by connecting a field signal to the terminal or the connector on the Base plate for adaptors.
The Base plate for adaptors, one of the components of the N-IO I/O unit (for Adaptor) which is defined as A2ZN3D for the system model, enables to mount I/O modules and various I/O adaptors depending on the signal types. The I/O modules can be mounted in a single or dual-redundant configuration. Channels on the base plate are available to connect up to 16 I/O adaptors. All channels have a disconnection function by making an I/O adaptor half-inserted that can disconnect the signal line between the field terminal, the I/O module, and the I/O adaptor. The base plate has a system power supply and field power supply interface and has a function to supply power to the I/O modules and I/O adaptors from the node interface unit via the power supply cable for base plates (A2KPB00) as well as to supply field power to the inside of the I/O adaptors by connecting the specified power line.

I/O modules (for N-IO) 
A2MMM843, A2MDV843

I/O adaptors (for N-IO) for Yokogawa Base Plate A2BN3D-02010 for adaptor (for N-IO, 16-channel)
A2SAM105, A2SAM505, A2SAT105, A2SAP105, A2SDV105, A2SDV505, A2SDV506, A2SMX801, A2SMX802
*1: A2AST105 cannot be mounted on A2BN3D-x9xxx.
*2: A2EXR001 can be used as a shunt resistor for A2SAP105.
*3: When these I/O adaptors are mounded on A2BN3D-x9xxx, there are some limitations.

Connection for Yokogawa Base Plate A2BN3D-02010 for adaptor (for N-IO, 16-channel)
Power supply
System power supply: Connected by the power supply cable for base plate (A2KPB00).
Field power supply: Connected by the cable (*3) to the field power supply terminal.
Grounding: M3 screw terminal
Field signal: 
Pressure clamp terminal (A2BN3D-x1) (*4)
Spring clamp terminal (A2BN3D-x2) (*4)
Cable connector (A2BN3D-x9) (*5)
F-SB bus: Connected by F-SB bus cable (A2KLF00)

*4: A cable must be prepared separately: Cable size (0.5 to 2.5 mm2).
*5: A signal cable (AKB331 or AKB651) and a terminal board (A2BM4) must be prepared separately.
Weight for Yokogawa Base Plate A2BN3D-02010 for adaptor (for N-IO, 16-channel)
Approx. 1.3 kg

Model and Suffix Codes for Yokogawa Base Plate A2BN3D-02010 for adaptor (for N-IO, 16-channel)  

Model  A2BN3D Base plate for adaptor (for N-IO, 16-channel, Pressure clamp terminal or spring clamp terminal)

Suffix Codes

-0  DIN rail mount type

-1 Wall mount type

 0  With no terminal block (only for N-IO field enclosure maintenance) (*1)

 1  Pressure clamp terminal for field wiring

 2  Spring clamp terminal for field wiring

 9  Cable connector interface (for AKB cable) (*2) (*3)

  0  With no explosion protection

  1  With explosion protection

  0  Basic type

  1  With ISA standard G3 option

  2  With temperature (-40 to 70 °C) option (*2)

  3  With ISA standard G3 option and temperature (-40 to 70 °C) option (*2)

  0  With no RJC

  1  With RJC (*3)

Option Code

/L  With TAG label (*3) (*4)